€ 119,79 (€ 99,00 excl. BTW) stuk
Gewicht: 2.5 kg

Filament diameter

Aan winkelwagen toevoegen Aan verlanglijst toevoegen


BigRep ASA is an engineering-grade UV-resistant filament for high-strength and environmentally exposed applications. Designed for industrial and end-use parts, ASA is a strong material with high mechanical resistance, low shrinkage and superior layer adhesion. It is highly suited to applications in automotive, sporting goods, white goods and consumer appliances.

BigRep ASA has been optimized for large-format additive manufacturing and is able to print complex, ready-to-use parts including end-use, factory tooling and functional prototypes with demanding geometries.


  • High impact strength
  • High weather and UV resistance
  • Minimal shrinkage
  • High heat resistance
  • Easy post-processing

Hands-on Review

ASA is seeing a surge in popularity as an alternative to ABS with improved printability as it prints at a lower temperature and is less prone to shrinkage and warping. Its tensile strength is a noteworthy 33% higher at 40MPa, and while lower, the heat deflection temperature is still an impressive 186°F. Additionally, ASA is UV resistant so it can handle the outdoors just fine. Those traits make it ideal for automotive and sporting goods applications.

Physical properties:

Material Acrylonnitrile Styrene Acrylate
Filament Sizes 2.3, 4.5, 8.0 kg
Diameter 2.85 mm
Density 1.08 g/cm3
Flexural Modulus (ISO 178) 1250 MPa
Tensile Strength (ISO 527) 40 MPa
Tensile Modulus (ATM D638) 1900 MPa
Impact Strength, notched (ISO 179) 30 kJ/m²
HDT / B (ISO 75) 86 °C

Recommended printing conditions:

Nozzle Temperature 200 - 240 °C
Print Bed Temperature 40 - 80 °C
Environmental Temperature n.a.
Printing Speed > 40 mm/s

CAUTION: To ensure constant material properties and printability the filament should always be kept dry.



Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten



Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem




Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2024. All Rights Reserved.