085-3037232
info@multi-3dprint.nl
Ma. t/m Vr. 09:00 - 17:00 & Za. Gesloten (eventueel op afspraak)

Prusa CORE One Assembled

8f758e49-fb0e-45f1-a0f0-073706f38e7c_-_kopie

2071496c-c870-4c5f-a2c0-6f4c9cf0584f_-_kopie

199389dd-b4e8-4870-977a-e97779adec86_-_kopie

e7e2244d-5fcb-4e10-9b69-8117dfe822e8_-_kopie

€ 1.349,00 (€ 1.114,88 excl. BTW) stuk

Gewicht: 23 kg
Merk: PRUSA 3D

Aan winkelwagen toevoegen Aan verlanglijst toevoegen

PRE-ORDER

Pre-order your Prusa CORE One now, delivery in early 2025.

Whether you're new to 3D printing or a seasoned expert, Prusa CORE One ticks all the boxes for a reliable all-around machine. Featuring an enclosed chamber and CoreXY design, it combines high-speed printing and maximum print quality with a large 250×220×270mm print area. And there are plenty of clever design choices, e.g., an all-steel exoskeleton frame for maximum firmness and robustness. You’ll be ready to print your first model in minutes thanks to intuitive software and one-click printing. And with nearly one million 3D models at Printables.com, you will always have something awesome to print!

The CORE One is a 3D printing workhorse engineered in the proven Prusa tradition. Designed with a "made to last" philosophy and made from premium materials, the CORE One offers exceptional reliability with minimal maintenance. The enclosed chamber, capable of reaching up to 55 °C, features active temperature control for high-quality printing across a wide range of materials from PLA and PETG (even with the door closed) to more demanding materials like ASA, PC, or Nylon.

Plug and Print!

10 minutes from unpacking to first print

Unpack the printer, perform a one-time calibration, and you’re ready to go. Equipped with advanced sensors for hassle-free printing, the CORE One is a true “start and forget” machine. Simply start your print and let the printer handle the rest, from fully automatic first-layer calibration to pausing the print and sending a notification if the filament runs out.

Flawless Precision

Outstanding print quality thanks to the Nextruder

You can be sure that with our internally developed, quality-focused print profiles, your models will turn out exactly the way they were designed, with perfect dimensional accuracy. CORE One takes advantage of the upgraded Nextruder with 360° cooling that enables flawless printing of 75° overhangs, saving both time and material.

Maximum Speed without a catch

The CORE One is fast with every filament, not just specialized ones

Don’t limit your projects with a small selection of specialized “high-speed” filaments. Use any PLA, PETG or any of the advanced materials. While the CORE One is our fastest printer yet thanks to its robust CoreXY kinematics, high-flow nozzle, Input Shaper and factory-tuned print profiles for 200+ filaments, it never sacrifices quality for quicker print times.

Compact Footprint, Large Volume

The perfect fit for any home, workplace or print farm

The Prusa CORE One takes up 50% less space than the MK4S inside an enclosure, yet it delivers an impressive 30% increase in print volume. Space efficiency matters - even for us! With a massive 3D print farm of over 600 machines, the CORE One's compact footprint and optimized design let us fit even more printers into the same space and boost our production.

The Best Solution for Advanced Materials

Print durable functional models easily and without warping!

The chamber is as compact as possible, with a cleverly designed recess on each side to minimize its volume. This allows the chamber to quickly reach higher temperatures (up to 55°C), enabling you to print ASA, ABS, PC, PA (Nylons), and other advanced materials smoothly, without warping. The automatic ventilation system and active temperature control enable flawless printing of PLA - even with the door completely closed!

Robust Steel Exoskeleton

A design that works and looks the Part

Prusa CORE One is built as an all-steel exoskeleton. The enclosure is an integral part of the printer, providing it with outstanding stability and rigidity. However, maintenance is still simple, and if you need to replace a worn part in a couple of years, it’s a complete no-brainer. You can take everything apart with a screwdriver. As usual with us, we hold parts in stock for years

The CORE One is a fully enclosed CoreXY 3D printer with active temperature control designed for top print quality and speed. Easy to set up and made to last, this rugged machine is perfect for beginners and professionals alike. Designed and manufactured in the EU.

Technical Parameters

Measurements
Build Volume	250 x 220 x 270 mm \| 9.8 x 8.6 x 10.6 in
Filament diameter	1.75 mm
Layer height	0.05-0.30 mm
Printer dimensions	22,5 kg, 415×444×555 mm; 16.3×17.5×21.8 in (X×Y×Z)
Electronics
Mainboard	Custom 32-bit xBuddy electronics with STM32
Stepper Drivers	Trinamic 2130
Stepper motors	Precise 0.9° X,Y stepper motors (prevents VFA)
Extruder
Extruder	Nextruder, Direct Drive, E3D V6 compatible (with adapter)
Extruder electronics	Custom breakout board for connecting fans, thermistors and other parts.
Filament path	Aluminum heatsink, all-metal hotend
Drive system	Nextruder Planetary Gear System, 10:1 gearbox ratio
Cooling fan	High-performance turbine, 360° cooling system
Nozzle	High-flow Prusa Nozzle brass CHT - 0.4 mm
Max. operating temperature
Max nozzle temperature	290 °C / 554 °F
Max heatbed temperature	120 °C / 248 °F
Max chamber temperature	55 °C / 131 °F
Controls
LCD screen	3.5″ graphic 65k color screen
Touch control	Yes
Firmware update interface	USB drive, Prusa Connect, Prusa Mobile App
Prusa Connect support	Yes
Prusa App for iOS and Android support	Yes
Quick-Swap nozzle system	Yes
Lighting	Yes
Accessories
Internal camera	optional, in-chamber solution
MMU3 support	Yes
HEPA filtration	optional addon
Advanced Filtration System	optional addon
GPIO Board compatibility	Yes
Accelerometer compatibility	Yes
Connectivity
Ethernet connection	Yes
Wi-Fi	NFC receiver, optional ESP Wi-Fi module (delivered with the printer)
Sensors
Filament Sensor	Yes (2 sensors)
Loadcell sensor	Yes
Thermistors	5 high-precision thermistors (genuine Semitec)
Fan motors monitoring	Yes
Door sensor	Yes
Printing
Print medium	USB drive / LAN / internet via Prusa Connect or mobile Prusa App
Print surface	Magnetic heatbed with removable PEI spring steel sheets
First layer calibration	Fully automatic (thanks to the Load Cell sensor)
Bed calibration	Automatic, Mesh Bed Leveling (only on print area)
Input shaper	Yes
Supported materials	PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and when using the optional Advanced Filtration System ABS, ASA, HIPS, PA
Phase Stepping	Yes
Power
PSU	240W
Power panic	Custom made by Delta with Power Panic HW
Power consumption	PLA settings: 90W / ABS settings: 110W

Basic package includes:

Prusa CORE One Assembled 3D Printer
Prusament PLA Prusa Galaxy Black 1kg
Smooth PEI Print Sheet
USB drive with sample prints (G-codes)
3D Printing Handbook
Alcohol-saturated wipes, acupuncture needle

Warranty note

* Consumable parts, such as print sheets (smooth, textured, etc.), are not covered by the warranty since their coatings are expected to deteriorate over time, unless the failure is due to a defect in materials or workmanship. Cosmetic damage, which includes, but is not limited to, scratches, dents, cracks, or other aesthetic damage, is also not covered. Only sheets defective upon delivery are covered by the warranty.

CORE One vs MK4S vs XL Comparison

	Prusa CORE One	Original Prusa MK4S	Original Prusa XL
Build volume	250 x 220 x 270 mm \| 9.8 x 8.6 x 10.6 in	250 x 210 x 220 mm \| 9.84 x 8.3 x 8.6 in	360 x 360 x 360 mm \| 14.17 x 14.17 x 14.17 in
Frame	All-steel exoskeleton	Aluminium extrusions and frame	Aluminium extrusions and steel sheets
Printer variants	Assembled (kit will be available later)	Assembled or kit	Assembled or Semi-assembled
Multi Material Printing	Yes, with optional Multi-material Upgrade (MMU3)	Yes, with optional Multi-material Upgrade (MMU3)	True multi-material printing with up 5 independent toolheads
Chamber	Yes	No (optional Enclosure as a separate add-on)	No (optional Enclosure as a separate add-on)
Chamber temperature control	Yes	No	No
Max chamber temperature	55 °C / 131 °F	45 °C / 113 °F (in the Enclosure)	45 °C / 113 °F (in the Enclosure)
Max hotend/heatbed temp.	290 °C / 120 °C (554 °F / 248 °F)	290 °C / 120 °C (554 °F / 248 °F)	290 °C / 120 °C (554 °F / 248 °F)
Provided nozzle	High-flow Prusa Nozzle brass CHT - 0.4 mm	High-flow Prusa Nozzle brass CHT - 0.4 mm	Prusa Nozzle brass 0.4 mm
Provided steel sheet	Smooth PEI	Smooth PEI	Satin
Mainboard	Custom 32-bit xBuddy electronics with STM32	Custom 32-bit xBuddy electronics with STM32	Custom 32-bit xBuddy electronics with STM32
Extruder	Nextruder, Direct Drive, E3D V6 compatible (with adapter)	Nextruder, Direct Drive, E3D V6 compatible (with adapter)	Nextruder, Direct Drive, E3D V6 compatible (with adapter)
Stepper motors	0.9° X,Y Stepper motors	0.9° X,Y Stepper motors	1.8° Stepper motors
Bed heating	Whole heatbed (no matter the size of the object)	Whole heatbed (no matter the size of the object)	16x Individual heatbed tiles, energy-efficient when printing small objects
First layer calibration	Fully automatic (thanks to the Loadcell sensor)	Fully automatic (thanks to the Loadcell sensor)	Fully automatic (thanks to the Loadcell sensor)
Advanced sensors	Filament sensor (2x), Loadcell sensor, Power panic, 5 high-precision thermistors (genuine Semitec) + fan motors RPM monitoring + Door sensor	Filament sensor, Loadcell sensor, Power panic, 4 high-precision thermistors (genuine Semitec) + fan motors RPM monitoring	Filament sensor (2x), Loadcell sensor, Power panic, 4 high-precision thermistors (genuine Semitec) + fan motors RPM monitoring
Built-in Lighting	Chamber light, bed RGB status bar, display RGB status bar	Display RGB status bar	Chamber light, display RGB status bar
LCD screen	3.5″ graphic 65k color screen, touch control	3.5″ graphic 65k color screen, touch control	3.5″ graphic 65k color screen, touch control
Firmware update interface	USB drive, Prusa Connect, Prusa Mobile App	USB drive, Prusa Connect, Prusa Mobile App	USB drive, Prusa Connect, Prusa Mobile App
Remote Control	Yes, via Prusa Connect and/or Prusa Mobile App	Yes, via Prusa Connect and/or Prusa Mobile App	Yes, via Prusa Connect and/or Prusa Mobile App
Camera	Optional addon, in-chamber solution	Optional addon, standalone solution	Optional addon, standalone solution
Advanced Filtration System	Optional addon	Optional addon for the Enclosure	Part of the Enclosure
GPIO Board	Optional addon	Optional addon	No
Accelerometer	Optional addon	Optional addon	Yes
Connectivity	Ethernet, NFC receiver, removable ESP Wi-Fi module (delivered with the printer)	Ethernet, NFC receiver, removable ESP Wi-Fi module (delivered with the printer)	Ethernet, NFC receiver, removable ESP Wi-Fi module (delivered with the printer)
Print medium	USB drive / LAN / internet via Prusa Connect or mobile Prusa App	USB drive / LAN / internet via Prusa Connect or mobile Prusa App	USB drive / LAN / internet via Prusa Connect or mobile Prusa App
Input shaper	Yes	Yes	Yes
PhaseStepping	Yes	No	Yes
Printer kit price	949 USD / 1049 EUR (VAT incl.)	799 USD / 889 EUR (VAT incl.)	1999 USD / 2099 EUR (VAT incl.)
Assembled printer price	1199 USD / 1349 EUR (VAT incl.)	1099 USD / 1199 EUR (VAT incl.)	2499 USD / 2599 EUR (VAT incl.)

Contactgegevens

Openingstijden

Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

24 december vanaf 15.00 GESLOTEN

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten

Adres

Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem

Bellen

085-3037232

Mailen

info@multi-3dprint.nl

Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands

0031(0)853037232 info@multi-3dprint.nl
kvk:60719095

VAT no: NL.8540.30.669.B01

_{Privacyverklaring}