Zortrax Cleaning Station
Zortrax Cleaning Station is a professional post-processing device designed to remove uncured resin from the surfaces of printed parts. The device uses an impeller-based system to clean 3D prints, which reduces the risk of damaging details. The Cleaning Station supports most popular resin 3D printing technologies – UV LCD, DLP, and SLA.
- 300 x 210 x 270 mm workspace;
- tank capacity 18l;
- two mechanical filters: polypropylene cartridge (1 micron) and stainless mesh cartridge with UV lighting (150 microns);
- excessive cleaning fluid level sensor;
- flow meter preventing operation without the cleaning fluid in the system.
Zortrax Cleaning Station is a post-processing device made to remove excessive, uncured resin from models' surfaces. It is a standalone device that can be used to support all types of resin 3D printers available on the market. It’s dedicated to post-process even most professional and demanding resins (quality approved by BASF Forward AM and Henkel/Loctite).
Supports most popular resin 3D printing technologies: UV LCD, DLP, and SLA
The impeller-based cleaning system
The impeller reduces the risk of damaging precise, fragile prints. The entire cleaning process lasts for about 5 minutes and is fully automated. When it is done, the top cover opens up and the build platform with clean prints is moved out of the cleaning fluid.
Due to filters constantly working in the Zortrax Cleaning Station, the isopropyl alcohol can be reused in multiple cleaning sessions.
Compatible with Inkspire 2
The build platform holder in the Zortrax Cleaning Station is compatible with the Zortrax Inkspire 2 build platform which enables placing the printed models in the device without touching them.
Ready to use right away
Zortrax Cleaning Station does not need calibration before first use.
Working area dimensions
300 x 210 x 270 mm (11.8 x 8.27 x 10.6 in)
polypropylene cartridge (1 micron) and stainless mesh cartridge with UV lighting (150 microns)
touch control panel
excessive cleaning fluid level sensor and flow meter preventing operation without the cleaning fluid in the system
WEIGHT AND PHYSICAL DIMENSIONS
Device (W x D x H)
460 x 460 x 490 mm (18.1 x 18.1 x 19.3 in)
Weight - without IPA
40 kg (88.2 lb)
Weight - with IPA (full tank)
around 60 kg (132 lb)
100 - 240 V AC 4 A 50/60 Hz
Maximum power consumption
Zortrax Cleaning Station, a metal basket for 3D prints’ cleaning, a holder for attaching the Inkspire 2 platform, Starter Kit
All information contained in this brochure and specification is subject to change without notice.