ESD
Liqcreate ESD is an opaque black photopolymer resin and can be processed on most resin based 3D-printers. 3D-printed parts from this material exhibit electrostatic discharge properties needed for electronic manufacturing and parts for ESD-safe workplaces (EPA). Liqcreate ESD can be used on open DLP, LCD and SLA 3D-printers in the range of 385 – 420nm.
Due to the isotropic electrostatic dissipative properties, it is suitable for electronic devices and components that require ESD. Reduce risk and increase manufacturing capabilities by printing custom jigs, fixtures and tools to protect critical electronics components from static discharge.
 |
 |
 |
| Electrostatic discharge |
Smooth surface |
Isotropic ESD propertie |
Technical specifications
3D-printed parts from Liqcreate ESD are rigid with a some bendability. The parts have uniform ESD properties accross the build and are easy to print. Liqcreate ESD is compatible with open DLP, LCD, MSLA and SLA 3D-printers in the range of 385 – 420nm. Use Liqcreate ESD to protect critical electronics components from static discharge. Liqcreate ESD is a cost-effective solution for producing static-dissipative parts designed for the factory floor.
Polymer properties
| Mechanical Properties | UV post-curing |
|---|
| Description | Method | Metric[1] | Imperial[1] |
|---|
| Tensile strength |
D638 |
37 MPa |
5.37 ksi |
| Elongation at break |
D638 |
5 – 10% |
5 – 10% |
| Tensile modulus |
D638 |
1.9 GPa |
276 ksi |
| Flexural strength |
D790 |
83 MPa |
12.04 ksi |
| Flexural modulus |
D790 |
2.1 GPa |
305 ksi |
| IZOD Impact notched |
ISO 180 |
3.30 kJ/m2 |
1.57 ft-lb/in2 |
| IZOD Impact notched |
D256 |
30 J/m |
0.56 ft-lb/in |
| Water sorption |
D570-98 |
3.84% |
3.84% |
| Degradation temperature |
Internal method |
>250°C[2] |
>482°F[2] |
| HDT-B 0.45 MPa |
ISO75 |
51°C |
124°F |
| HDT-A 1.80 MPa |
ISO75 |
43°C |
109°F |
| Surface resistivity |
AE30-ANSI |
105 – 107 Ω/sq |
105 – 107 Ω/sq |
| Volume resistivity |
AE30-ANSI |
105 – 107 Ω-cm |
105 – 107 Ω-cm |
| Shore D Hardness |
D2240 |
82 |
82 |
[1]Post-cured 30 minutes with LED curing at 60°C in the Wicked Engineering Curebox. These values may vary and depend on individual machine processing and post-curing. [2]Softening above HDT, but no cracking in part up to 250°C / 482°F.
Liquid Properties
| Description | Value |
|---|
| Appearance |
Opaque black liquid |
| Viscosity |
1150 mPa⋅s at 25°C |
| Density |
1.18 g/cm3 |
| Ec (405nm) |
3.85 mJ/cm2 |
| Dp (405nm) |
0.10 mm |
| Ec (385nm) |
5.77 mJ/cm2 |
| Dp (385nm) |
0.10 mm |
Processing instructions
New to resin 3D-printing, or a seasoned professional, it is advised to scroll through the processing instructions. Detailed informatin on printing parameters, support settings, cleaning, washing, post-curing, part orientation, shrinkage compensation, minimum wall thickness and other resin behaviour can be found in the link.
Hazard statements on CLP product label
| H315: Causes skin irritation. |
| H317: May cause an allergic skin reaction. |
| H319: Causes serious eye irritation. |
| H411: Toxic to aquatic life with long-lasting effects. |
3D Printer compatibility
Do you want to use Liqcreate ESD resin? Check if ESD printing settings are available on our website for your printer!
| Printer name |
Compatible? |
| Shining3D AccuFab-L4K |
Soon available |
| Asiga Max UV |
Yes |
| Asiga Pro 4K |
Yes |
| Anycubic Photon Mono |
Yes |
| Anycubic Photon Mono SE |
Yes |
| Anycubic Photon Mono X |
Yes |
| Anycubic Photon M3 |
Yes |
| Anycubic Photon M3 Plus |
Yes |
| Anycubic Photon D2 |
Yes |
| Elegoo Mars 2 |
Soon available |
| Elegoo Mars 3 |
Yes |
| Elegoo Saturn |
Yes |
| Phrozen Sonic Mini 4K |
Soon available |
| Phrozen Sonic Mighty 4K |
Yes |
| Phrozen Series |
Preliminary settings |
| Peopoly Phenom Prime |
Soon available |
| Formlabs Form2 |
Not compatible |
| 385 – 420nm MSLA, SLA & DLP printer |
Contact us |
